Photoetched Ferrari 330 P4 steering wheel spokes

0.1 mm thick photo-etched steering wheel spokes set for Ferrari 330 P4  in 1/8 scale

The set consists of:

N°1 spokes with 4 holes

N°1 spokes with 6 holes

N°1 spokes with 8 holes

N° 8 M0.8x4.2mm screws

In the gallery you can see the assembly steps. Apply the chosen photoetching using vinyl glue or even cyanoacrylic glue as it is applicable on the hidden face of the photoetching. Drill the central holes of the hub with a 0.7 mm bit, in this case the screws will be tightened with a flat screwdriver, or drill 0.8 mm holes in this case the screws will be glued with vinyl glue.

If necessary, enlarge the holes on the steering wheel spokes with a round file before carrying out the assembly operations.

The steering wheel and central logo are not supplied in the kit.